Apron feeder is widely used in mining, metallurgy, building materials and coal and other industrial sectors, suitable for short distance transport of large block degree of materials, with the advantages of large load bearing, uniform ore feeding, strong impact resistance. At the same time, it also has the disadvantages of large volume, more moving parts, more lubrication points, and large maintenance workload.
There are more lubrication points on apron feeder, and poor lubrication of any part such as reducer, motor, bottom tug, weight support wheel, tension device, etc. May lead to bearing damage, equipment outage and other accidents. Do a good job of lubrication on apron feeder, to improve the utilization rate of equipment. It is of great significance to ensure the good performance of the equipment, reduce the amount of labor, reduce the amount of maintenance and repair costs. Apron feeder lubrication
Uneven distribution of bone point oil leads to poor hole sliding effect, fast equipment wear, large maintenance workload, and rising production costs: (3) can not be measured, the amount of lubrication is more or less, which is easy to cause waste or lubrication is not in place; (4) high manual labor intensity. In order to solve the problems caused by manual lubrication, ensure that the equipment is well lubricate to reduce the occurrence of faults, reduce production and maintenance costs, and improve the equipment operation rate, by comparing the products of multiple lubrication equipment manufacturers, install thrh-iii automatic oil injection lubrication system to apron feeder.
Automatic oil injection lubrication system
Automatic centralized lubrication system is the organic integration of sensing technology, information technology, automatic control, machinery manufacturing and management ideas, the lubrication system according to the timely, appropriate, accurate lubrication concept into the design and manufacturing, so that the lubrication of large-scale equipment into the era of automatic control and network monitoring, a large number of the previous single, two-line distributor lubrication system.
System functions
(1) The oil supply cycle, oil supply and oil supply time of any point can be adjusted; in the oil circuit length is different, the circle is micro, quasi surface integration flowmeter, the formation of double detection. The supply and supply of the fuel tank are monitored in real time and compared with the set value, and the fault is found and reported in time, and the fault nature and fault location are indicated
The system implements point-by-point oil supply and point-by-point detection to ensure the reliability of the test.
Apron feeder ruihua system has automatic, manual and other control methods, and can complete the integration of hole slip point parameters through the upper computer:
Each lubrication point in the system has a unique number, not repeated, and the lubrication point number can be adjusted.