Bucket elevator supplier is playing an important role in modern industrial production. Every year, they provide plenty of bucket elevators into the industrial production market, so that improves the industrial production efficiency. Bucket elevator becomes an obbligato equipment in transferring material and production process. At present, bucket elevator is not only a material transferring equipment, but also a constituent unit of the whole production equipment. If something problem with the bucket elevator, it will cause industrial production pause and a series of problems. Simultaneously, bucket elevator has the advantage of low drive power, less Invalid power, wide range usage, better sealing performance, long working life, higher lifting height and so on. Nowadays, as technology develops rapidly, there come out many machinery design programs. At the same time, bucket elevator supplier need to discuss the existing problems, and find the improvement methods to ensure a smooth operation of bucket elevator.
Bucket elevator supplier is very clear about the problems in bucket elevator area, and they are very professional in dealing with the problems. Here are 3 parts of bucket elevator that often cause problems.
1. Redirecting the drum and the casing to slide in one piece. At present, most bucket elevator uses floating redirection drum, tensioning mode for screw tightening. This tensioning method through the dynamic shaft through the bucket hoist shell, need to be placed in the housing, so that with the chain or tape to achieve the redirection drum and the bearing seat tensioning sliding. But in the actual production and processing of materials, often need to punch in the shell of the bucket hoist, and the use of polyurethane plate for sealing, and accompanied by mechanical action, the movement of the redirection drum will lead to LAX gap, so that dust from the gap escape.
2.Hydraulic tightening device：When the bucket elevator working for a certain time, its dustpan belt and chain is elongated. Often tighten the chain by adjusting the tightening screw or increasing the weight. However, the loophole of this method is that the increase of dust and rust in the air will lead to the rotation of the screw and nut becomes more difficult, and finally can only be forced to use the means of destruction to repair the tensioning device.
3.The tail wheel is connected with the shaft by a bulging sleeve: With the frequent agricultural processing operations, the material transportation volume also increases, which puts forward higher requirements for the stiffness and shaft strength of the bucket elevator. At present, the bond joint is a common connection between the directional drum and the dynamic shaft, in order to realize the synchronous rotation of the shaft and the directional drum, it is necessary to add the key way to the shaft and the hub. However, this will lead to the incision effect of the connector, so that the strain concentration at the junction, and then the multi-directional stress state, resulting in damage to the shaft and hub components of the hoist, is obviously not conducive to extending the service life of the hoist shaft and hub.
Through the explanation of the problems during the bucket elevator working process, the structural analysis of bucket elevator and the proper improvement methods, its not too hard to find, with the wide range application of bucket elevator, the only way to ensure the bucket elevator’s stabilization and high working efficiency is that doing continuously optimize and improve to the structure of bucket elevator. Henan EXCT company is a bucket elevator supplier, which has lots of experience in producing bucket elevator. We are a skilled manufacture in bucket elevator and have large and stable order in international market every year. It is a best choice to buy bucket elevator from EXCT.