The dry-mix mortar production line is a high-frequency equipment. It is widely used in dry mortar enterprises. Some companies even operate 24 hours a day, so the dry mortar production line is routinely maintained to ensure the normal operation of the equipment during production. As the winter comes, the temperature gradually decreases, and the lines of the dry-mix mortar production line may be damaged by freezing, especially in cold areas. Therefore, the daily maintenance of the dry-mix mortar production line is an important daily work. Every class of workers is strictly implemented after the completion of production. The dry-mix mortar production line should pay attention to the following aspects during daily maintenance: 1.The dry mix mortar production line should be placed in an environment with dry and no corrosive medium to ensure the normal service life of the dry mix mortar production line. The dry mix mortar production line is generally made of carbon steel and sprayed with a layer of rustproof paint, if it is placed in a corrosive medium for a long time, it is easy to rust.
2.After using the dry mortar production line, be sure to clean and dry the inside of the tube and the stirring blades with water. For long-term use, customers can spray rustproof oil in the cylinder and on the surface of the blade. If the material on the mixer blade is not cleaned, it will be difficult to clean after a long period of inactivity, and the mixing efficiency will affect the mixing efficiency and uniformity.
3. Always pay attention to whether the fasteners are loose after use and tighten them in time. The large dry-mix mortar production line will be equipped with the working platform, and the solid parts should be inspected regularly.
4. It is strictly forbidden to pinch iron nails, iron wire and other hard objects in cement and sand during feeding to avoid damage to the machinery. The materials should be screened before feeding to ensure that there are no other impurities.
5. After using the dry mortar mixer for a period of time, check the level of the lubricating oil. Add the oil is 30#. Lubricating oil is an important part of mechanical equipment. If the lubricating oil is not replenished in time, it may cause wear on the transmission part, so check the lubricating oil regularly.