Performance advantages of dewatering screen
1.The vibration motor of the dewatering screen is easy to replace. The rubber spring of the base is used for shock absorption, so that the amplitude is not large, the vibration is slow, and it can be cleaned off.
2.Can be customized according to the output and water content, the side panel of the fuselage has a reinforcing plate, the bottom is equipped with support, the bottom is marked with a horizontal bar, and the discharge port is supported by a triangular steel plate.
3.The vibration motor is fixed with high-strength bolts, and the bottom spring is a rubber spring. The quality of the spring affects the life of the vibration motor. The sieve plate is fixed in a high density, and the sieve plate is provided with reinforcing ribs.
4.After the welder has welded, the weld hole will not be strictly formed, and the bottom is supported by channel steel.
5. In addition, the sieve hole can be adjusted according to needs, the equipment noise is small, and the dewatering effect is good.
6. Before delivery, the staff will debug it, whether the vibration motor is normal, and whether the vibration exciter is running well, to ensure the quality of the manufactured products for the customer.
7. Additional value of dewatering screen: For products with low mud content, the dewatering screen can also be used directly, and no sand washing machine is needed, which saves the cost of the customer and can achieve the same effect.

How to improve the production efficiency of dewatering screen?
Under normal circumstances, the production efficiency of the dewatering screen will be related to the excitation force, because the vibration exciter is the main vibration source of the dewatering screen. The working principle of the dewatering screen is to use the exciter to generate the exciting force, and then the sieve plate can be driven. Doing vertical reciprocating linear motion, so that the material on the sieve plate can complete the screening work, so that the user can get the quality of the sandstone aggregate, so if the production efficiency of the dewatering screen decreases, it is generally the vibration exciter’s problem.
First of all, you should look at the problem of the vibration motor, adjust the excitation force of the vibration motor, and then modify the magnitude of the excitation force by mobilizing the eccentric block;
Secondly, adjust the direction of the exciting force to ensure that the position and angle of the vibration motor are accurate;
The next step is to adjust the orientation and angle of the vibration motor equipment. To find the exact orientation, the two vibration motors tend to form a combined force, which affects the composition and matching of the excitation force.
Finally, the side ribs are reinforced for the dewatering screen frame, and the screen box, screen frame and reinforcing sheet are added.
 In addition to the above, there are many other reasons for the decline in the production efficiency of the dewatering screen. For example, the problems of the screen and the installation of the equipment are indirectly or directly affecting the production efficiency of the dewatering screen.