The central chain bucket elevator has the features of large conveying capacity, high lifting height, stable and reliable operation and long service life. It is suitable for conveying powdery, granular and small pieces of non-abrasive and abrasive materials such as coal, cement, stone, sand, clay, ore, etc., because the characteristic of drag chain, it is allowed to convey materials with higher temperature (material temperature does not exceed 250 °C). So how to make the central chain bucket elevator maximize its ability, EXCT will introduce the influence of the central chain bucket elevator from the two aspects: operation and environment.

1.On-site lighting must ensure the construction needs. It is forbidden to use mobile lighting towers and sun lamps. In the dangerous places, safety warning red lights should be set at night. Strengthen the construction and inspection of safety facilities before installation, weld safety piles, pull safety ropes, and pull safety nets in necessary parts.
2.The central chain bucket elevator is necessary to strengthen the education for workers on the correct use of helmets, carry out the necessary rewards and punishments, make eye-catching signs.
3.Trial operation, empty test run should be carried out after the installation is completed. After 2 hours of empty operation, the load can be tested as normal. Feeding with load should be uniform, prevent excessive feeding to block the lower part.
4.Central chain bucket elevators are used in the open air in most cases. Since the head part is equipped with electrical or transmission equipment such as motors and reducers, especially attention should be paid to the protection of these components in order to extend the service life of the equipment and reduce equipment maintain. It can be installed with a square cover, because the motor is the power source of the whole equipment. If the cover is not installed, it will be affected by bad weather such as rain or snow, the inside of the motor may enter the water, causing a short circuit. Therefore, The central chain bucket elevator is essential to install the cover in the open air condition to ensure that the central chain bucket elevator is not affected by the weather.
5. Pay attention to the problem of the motor cable. The wires connected to the motor are on the outside. After long-term wind and sun exposure, the insulation of the connecting wires will be deteriorated. In the case of long-term use, the wires connected to the motor cannot be subjected to high load voltage, and short-circuit wiring occurs. It is extremely easy to burn the motor and even cause people to risk electric shock. Therefore, the protection measures for the motor cable must also be protected.
If the above requirements for operation are met, the working efficiency of the central chain bucket elevator will be maximized and have a better protect for the equipment.