In order to solve the question of portable belt conveyor deviation, the most important is that you should pay attention to the dimensional accuracy of installation and daily maintenance. There are many element about belt deviation, so it needs to be treated differently for different reasons. First, adjust the conveyor idler set. You can adjust the position of the roller set when the The belt of the portable belt conveyor deviates from the middle part. The mounting holes on both sides of the conveyor idlers set are machined for long holes for adjustment. The specific adjustment method is that the belt is tilted to that side, that side of the conveyor idler set moves towards the direction of the belt forward, or the other side retroposition. If the belt runs off to the front, the back part of the idlers should move to the left and the upper part of the idlers should move to the right. Second, install the aligning roller. There are many types of aligning idlers, such as intermediate shaft type, four-link type, vertical roller type, etc. The principle is to use the blocking or idlers in the horizontal direction of rotation to block or produce transverse thrust to make the belt automatically centripetal adjustment belt deviation.Generally, this method is more reasonable when the total length of the belt conveyor is shorter or the portable belt conveyor runs in both directions. The reason is that the shorter belt conveyor is easier to run off-track and not easy to adjust.And the long belt conveyor had better not use this method, because the use of adjustable idlers will have an impact on the service life of the belt.Third, adjust the position of the driving drum and the reversing drum. The adjustment of the driving drum and the reversing drum is an important part of the belt deviation adjustment.Because a belt conveyor has at least 2-5 rollers, the installation of all rollers must be perpendicular to the belt conveyor length of the Central Line, if the deviation is too large will inevitably occur deviation.The adjustment method is similar to the adjustment of idlers.For the head drum, if the belt runs to the right side of the drum, the bearing seat on the right side should move forward; if the belt runs to the left side of the drum, the bearing seat on the left side should move forward; correspondingly, the bearing seat on the left side can be moved backward or the bearing seat on the right side can be moved backward.The adjustment method of the tail drum is just opposite to that of the head drum.The belt is adjusted repeatedly until it is in the desired position.It is better to install the roller accurately before adjusting drive or changing direction.Fifth, two-way running belt conveyor deviation adjustment.Two-way operation of the belt belt deviation adjustment belt deviation adjustment than one-way belt conveyor adjustment is relatively more difficult, in the specific adjustment should be adjusted in one direction, and then adjust the other direction.When adjusting, carefully observe the relationship between belt movement direction and running deviation trend, and make adjustments one by one.At the same time, it should be noted that the belt in the vulcanization joint should make the belt section length of the direction of uniform force, in the use of guide chain traction is on both sides of the force as equal as possible.
Portable belt conveyor with light, mobile suitable for bulk loading, packaging transport and other occasions, with a variety of applicable occasions, simple maintenance and other characteristics.So in life is very common, the above is about the mobile belt conveyor belt deviation part of the solution, I hope to help you.