Fully sealed Steep angle belt conveyor is mainly used for large industrial and mining, sand and stone material conveying equipment, suitable for sand and stone factory, coal transport line, sand and stone production line etc.

Due to the characteristics of cement and mining industry production, raw material mines are often far away from the main production area. With the maturity of the long distance belt conveyor mechanism manufacturing technology and design concept, a few kilometers, more than ten kilometers or even dozens of kilometers of belt conveyor were used in cement plant more and more.

The sizer crusher is suitable for crushing brittle materials below medium hardness, mainly for medium and fine crushing of ores in the industries of sintered ore, coal, cement, silicate, glass and ceramics.

Large inclination belt conveyor (sidewall belt conveyor) is a general purpose continuous conveying equipment for bulk materials, using a conveyor belt with corrugated sidewall and cross cleat. Therefore, it is especially suitable for large inclination conveying. For conveying materials with special requirements, such as: high temperature, materials with acid, alkali, oil substances or organic solvents and other ingredients of materials,need to use special conveyor belt.

Sleep incline belt conveyor can not only be applied to the general normal temperature environment (closed or open environment), but also according to the special environment to select special conveyor belt, special sidewall, cleat and with the selection of corresponding protective measures to achieve heat resistance, cold resistance, anticorrosive, explosion-proof and flame retardant conditions.

Overland belt conveyor is mainly used for the transport of bulk materials and varies greatly in its design and application depending on the different location, working environment and type of material to be transported. It can not only be used for continuous conveying of materials, but can also be combined with other existing equipment in the factory to form a large scale fully automated production process,and make the enterprises to save a lot of labour costs.

The secondary sizer crusher mainly adopts special wear-resistant toothed roller rotating at high speed to split and crush materials (traditional sizer crusher adopts low speed extrusion crushing), forming a high productivity mechanism. The secondary sizer crusher is suitable for sintered ore, coal, cement, silicate, glass, ceramics and other industries. It is suitable for crushing brittle materials below medium hardness and is mainly used for medium and fine crushing of ores.

All Twin shaft mineral sizer will set the feeding port, and the biggest role of the feed port is to exclude the excessive size in the feed material, because if such super-size material entered into the crusher, not only will accelerate the wear of the machine wear parts, but also cause the following damage to the equipment

it can improve the service life of the equipment. Because the working medium of the hydraulic coupling is liquid, the input shaft and the output shaft are not rigidly connected, so the shock and vibration caused by the sudden accumulation or accumulation of external load can be transformed into a continuous gradual change so that the dynamic load can be eliminated or partially eliminated. Thus prolonging the service life of transmission parts.

Pendulum bucket elevator is operated in a closed casing, and the material is conveyed and lifted by the bucket suspended from the chain, through a combination conveying of horizontal-vertical-horizontal, which can be fed at a single point or multiple points, and discharged at a single point or multiple points through the discharge device.

Trough Screw conveyor structure is simple, easy to operate, easy to maintain, widely used in metallurgy, mining, power, building materials, and other industries. In order to adapt to the changing situation, screw conveyors are constantly improved and subdivided into a variety of types. As per the Angle of conveying material displacement direction, the Screw conveyor is divided into a horizontal screw conveyor and vertical screw conveyor.

There are many mine belt conveyor manufacturers , but there is a fundamental difference between industrial and mining belt conveyor and light while the industrial and mining belt conveyor is heavy. Many manufacturers are not willing to produce heavy belt conveyor. Another advantage is that the throughput is particularly large, the height of the promotion is very high.

U-type screw conveyor is a kind of screw conveyor, widely used in grain, chemical industry, building materials, metallurgy, mining, electric power and other departments. It is mainly for conveying small granular, powder, small lump materials and not suitable for conveying materials that are easy to deteriorate, viscous and caking, as well as materials with large water content.

1.The material accumulates at the charge hole When adding materials unevenly or not same, it will lead to the phenomenon of blockage of the charge hole. The solution to convey a certain amount of material compound, keep conveying material is uniformly added and will not make the material hole deformation.

The commonly used types and application scenarios are as follows: Heavy Apron Feeder, Light Plate Feeder, Trough Feeder, Motor Vibration Feeder The advantage of heavy plate feeder heavy plate feeder is that the amount of ore can be adjusted according to the speed of the chain plate. The impact resistance is greater than any kind of feeder, so the feeder has a long service life and a large amount of ore. Light plate feeder is mostly used for small and medium-sized mines coarsely broken feeding. The apron feeder features a simple structure and small footprint, mostly used for small mini

Apron feeder is also known as plate feeder which is divided into heavy, medium, light three series according to the conveying material size or throughput. According to the strength of the material, production capacity, the size of the silo pressure, and the size of the material bulk density choose different series of apron feeders. Heavy plate feeder is widely used in mining, metallurgy, building materials, and coal industry, and other sectors.

steel apron feeder as a heavy machinery products, the use of severe environment, so in the use of the process must be timely attention to the changes in the steel apron feeder, timely maintenance, to extend the service life, so as not to delay the normal production.

The vibratory screen first appeared in the U.S. mining industry in the 1970s, when they were designed to reduce labor and improve ore quality. So the machine was designed to be bulky and difficult to move. But because such a machine greatly reduces the labor intensity of workers and improves the output and quality. However, with the continuous progress of The Times and technology, the shape and function of the shaker are also undergoing earth-shaking changes. So far, shakers have developed into universal equipment that can be used in various fields.

The drive pulley is the part of the conveyor to transfer power. The drive pulley can be divided as per the production materials, into steel coil welding, cast steel, and cast iron. In terms of the structure type, there are assembled spoke plate, spoke type, integral spoke plate. In addition, the surface of the drum has smooth, coated glue, casting glue and other types, among which the plate welding assembly spoke plate casting glue drum is the most widely used. When the power is small, the bandwidth is small and the environment is dry. The smooth roller with bare leakage can be used. The frict

Heavy apron feeder: the equipment can withstand large warehouse pressure, feeding particle size ≥mm. Medium plate feeder: in principle, the equipment does not bear the warehouse pressure; Feed size < mm Light plate feeder: equipment does not bear warehouse pressure; Feeding size ≤mm Characteristics Of Apron Feeder Features Of Loading Heavy apron feeder in the force analysis to consider:

1. Principle A sizers crusher is a crushing machine widely used in coal preparation plants in China. This kind of crusher uses the shear and extrusion action of the crushing teeth to crush the material through two roller pairs. The core part of the sizers crusher is 2 rollers,1 roller supported on a fixed bearing, driven by the motor with pulley rotation. The other roller is supported on another fixed bearing. The two rollers rotate to each other through a pair of synchronous gears which are processed accurately. The two rollers shear the material through the roller to achieve the purpose of

Trommel screen is one of the widely used screening equipment. According to the different structures, the trommel screen can be divided into a shaft drum screen and no shaft drum screen. Regarding the drum screen, we need to consider the screening accuracy of the drum screen, because the screening accuracy is the quality standard of the drum screen. If the screening accuracy of the roller screen is too low, how do we solve it? Look at the analysis below.

1. Principle A sizers crusher is a crushing machine widely used in coal preparation plants in China. This kind of crusher uses the shear and extrusion action of the crushing teeth to crush the material through two roller pairs. The core part of the sizers crusher is 2 rollers,1 roller supported on a fixed bearing, driven by the motor with pulley rotation. The other roller is supported on another fixed bearing. The two rollers rotate to each other through a pair of synchronous gears which are processed accurately. The two rollers shear the material through the roller to achieve the purpose of

The main material of the rainproof cover is the circular colored light board. After the belt machine is installed, The shaped circular colored plate is placed directly on the belt conveyor cross frame. Besides, the rain cover is bolted and an observation hole is installed every 20 meters on one side of the circular colored light plate. More coal mine belt machine is generally installed on the belt rain cover, rather than a trestle.

Many industries, such as mineral processing, metallurgy, coal, construction, and etc., are inseparable from the participation of screening equipment. What's more, the trommel screen and vibrating screen belong to screening equipment, so sometimes they will be taken out for comparison. Which produces more? Which is better? Let's do the competition.