This paper mainly introduces the working principle and advantages of portable belt conveyor, in order to better understand the portable belt conveyors for bulk material’s application in the production process of various industries.

Portable belt conveyors for bulk material is different from the traditional fixed belt conveyor in the design, the whole machine structure is light and reasonable, and because of its mobility, it can be widely used in grain, bulk, light industry, packaging indoor and outdoor loading and unloading operations. portable belt conveyors for bulk material with light, mobility applicable in bulk loading, packaging transshipment and other occasions, with a variety of suitable occasions, easy maintenance and so on.

Based on the accident: bucket falls off the elevator, EXCT bucket elevator supplier analyses 4 reasons, and put forward the corresponding solutions. But, no matter what kinds of accidents occur about the above items, the operator should turn off the bucket elevator and inspect the equipment.

Belt sway switch is widely used in metallurgy, paper, coal, cement, mining, power magnet, food and other industrial fields of all kinds of belt conveyor equipment.However, his daily maintenance and maintenance appears to be crucial to ensure the efficiency of the equipment and the safety of relevant operators.

Because of the harsh environment of the coal mine, the service life of the ordinary belt sway switch is not long. After conducting more research, EXCT has designed a new type of belt sway switch to overcome the drawbacks of the ordinary one, and it has been successfully used to the coal mine belt conveyor.

To prevent the belt conveyor’s failure rate, to reduce the time of downtime, and to protect the belt conveyor and workers’ safety, the only way is that to install belt sway switch, the protection device.

The two-stage belt sway switch can be fixed on the top or bottom of the longitudinal beam of the conveyor, and the operating rod is about 25MM away from the edge of the belt. It is usually installed on both sides of the tape 0.3-2 meters from the head or tail. When the running deviation of the tape occurs, the edge of the tape drives the vertical roller to rotate and squeeze to make it incline.

As an experienced bucket elevator supplier, through many years of installation, commissioning and research, our professional technical personnel summed up the specific requirements of bucket elevator installation. Bucket elevator lower segment and the bearing surface, the upper drive shaft and the lower drive shaft are in the same vertical flat, the upper section, the lower section and intermediate casing centerline on the same vertical line, traction and hopper are fastened correctly and reliably, and without any deflection and collision of the shell.

The installation and maintenance of bucket elevator play a very important role in production process Relevant operators must make daily inspection and have a lot of professional knowledge, in order to reduce the bucket elevator failure rate.Through the analysis of the difficult problems encountered in practice, an effective solution is found, which can provide some guidance and reference for the production, use, installation and maintenance personnel.

To sustain the bucket elevator in a good state is the crucial guarantee of high work efficiency, low failure rate and long working hours. Therefore, it is necessary to do some proper maintenance. What’s more, choose a better bucket elevator supplier is important for all buyer

The problems existing in the dry mix mortar production line are not only related to the quality control, but also to the construction technology. Therefore, As long as it is used carefully to the raw materials, production technology, and do scientific, timely adjustment of production formula, dry mixed mortar line quality can be guaranteed, production costs can be effectively controlled.

This article mainly introduces the flow chart of checkup and maintenance for belt sway switch, so as to bring positive guidance significance to the practical operation and maintenance for belt sway switch.

Belt sway switch is the primary use switch in belt conveyor. There are lots of question should be noticed during select the switch by user and the technician’s installation. Switch’s Scientific choice and proper installation is the base of ensuring its safe operation. This article will start with the practice of belt sway switch of belt conveyor’s feeding system of steel plant, and briefly analyze what should be attention about belt sway switch’s selection and installation.

belt sway switch is a necessary part of belt conveyor, and has a widely use in our daily life. This article mainly introduced the maintenance and repair of belt sway switch, and also make part of introduction about it solution.

The design and configuration requirements of the dry mix production line of multifunctional mortar are combined with many factors to adapt to the segmentation of mortar products and changes in the market demand for new products.

The Production Process of Dry Mix Mortar Production Line (as known as dry mortar production line) is a kind of automatic dry mixed mortar mixing station controlled by advanced production equipment microcomputer through sand pretreatment (including drying, screening), batching measurement, mixing, storage packaging or bulk factory production of "dry mixed" pre-mixed commercial mortar.

If a problem in the dry mix production line with the lubrication system, the performance of the dry mix mortar equipment will be greatly reduced, and serious accident will occur frequently. Therefore, in the daily use process, such as automatic monitoring design, the regularly inspection of the wearing parts and maintenance of the lubrication system, must be taken seriously.

Dry mix mortar production line play an important role with the industrial development, and the packing and transportation system of dry mix mortar production line are also important , last time we have talked it, this time about it let us discuss the packing and transportation system again.

In dry mix mortar production line, dry mix mortar products are divided into bagged products and bulk products according to the packaging form. This article focuses on the packaging and transportation of bags and bulk products for dry mix mortar, as well as the composition of the packaging and transportation systems for the entire dry mix mortar production line.

The dry mix mortar production line absorbs the advanced design concept of Europe, the tank body adopts the tower layout, the management system is implanted with new modular management technology, and the human-machine dialogue function and automation degree are greatly improved. According to different configurations, the production line can reach 30,000-100,000 tons per year.

The quantity, distribution, approach time and material feeding plan of silo in dry mix mortar production line shall be made according to the project scale, project progress and the type of mortar used. This paper mainly introduces how to design bulk dry-mixed mortar silo and the problems that silo operators should pay attention to.

There are various types of machine type and selection of dry mix mortar production line， including multiple systems with different functions, for example: Raw material pretreament system, metering central control system, mixing system, packaging system, dust collection system. And many factors need to be considered in equipment selection.

Dry mix mortar production line includes: pretreatment of raw materials, storage of raw materials, metering, mixing, product packaging or bulk, and PLC automation control throughout the process. Every link is essential for dry mortar production and is indispensable. The pretreatment of dry-mixed mortar raw materials refers to the drying and sieving of raw sand, so that the particle size, gradation, water content and other indicators meet the formulation requirements, and the treatment effect on the quality of the mortar and the subsequent mechanized construction and final engineering Quality ha

Dry mix mortar has the advantages of high quality, wide of variety of material, environmental, excellent construction performance, etc. The dry mix mortar production line is a complete equipment chain. Generally, it consists of a conveying system, mixing system, packaging equipment, and the others.

The vibrating feeder, refers to a device that can feed the block and granular materials uniformly, regularly and continuously from the storage bin to the receiving device. In the gravel production line, it can feed continuously and evenly to the crushing machine, and the material is coarsely screened, which is widely used in crushing and screening combined equipment in metallurgy, coal mining, mineral processing, building materials, chemical industry, abrasives and other industries.