Heavy Duty Apron feeder is additionally referred to as plate feeder that is split into heavy, medium, light-weight 3 series in step with the conveyance material size or throughput. in step with the strength of the fabric, production capacity, the dimensions of the silo pressure, and therefore the size of the material bulk density opt for different series of Heavy Duty apron feeders. significant plate feeder is wide utilized in mining, metallurgy, building materials, and coal industry, and different sectors. This machine is principally used for conveying materials of various particle sizes and different bulk densities to numerous crushing, screening, and transportation instrumentation or receiving devices in brief distances uniformly and unendingly below the silo and funnel with bound warehouse pressure. it's not solely appropriate for process coarse material, however additionally suitable for fine material. within the variety of installation, the machine is split into 2 varieties of horizontal installation and inclined installation and therefore the most upward inclination will reach 25°. It will be in the harsh setting to complete significant work, the particle size of the material, composition change, temperature, viscosity, frost, rain and snow impact, or frozen materials have bigger adaptability. The feeding speed can be adjusted, and there are two basic styles of frequent selection, frequency conversion speed regulation and hydraulic motor speed regulation, and it will be management-led with the fabric device interlock. The control mode is split into machine-side control and remote control, which may make sure the most potency of the feeding device.

Working Principle

A Heavy Duty apron feeder is a conveying machine with a chain as traction. The chain is installed with a bearing trough plate, and the drive shaft is equipped with a sprocket. When working, the power of the motor is connected to the hollow shaft of the drive shaft and the reducer through the locking disk to drive the sprocket shaft to rotate. Through the sprocket tooth and chain pin shaft meshing, the drag chainplate does the continuous linear movement to reach the purpose of conveying materials. The chainplate is supported by the supporting wheel and the supporting sprocket mounted on the rack, and the chain meshes correctly by adjusting the tension device. The chainplate is supported by the supporting wheel and the supporting sprocket mounted on the rack, and the chain meshes correctly by adjusting the tension device.

General knowledge on the use of steel apron feeder

The Commonly Used Types And Application Scenarios of Apron Feeder