1. The vibration motor of the dewatering screen is easy to replace. The rubber spring of the base is used for shock absorption, so that the amplitude is not large, the vibration is slow, and it can be cleaned off.
2, The dewatering screen can be customized according to the output and water content, the side panel of the fuselage has a reinforcing plate, the bottom is equipped with a support, the bottom is marked with a horizontal bar, the discharge port is supported by a triangular steel plate, the plate is thick,
3. The vibration motor of dewatering screen is fixed with high-strength bolts, and the bottom spring is a rubber spring. The quality of the spring will affect the life of the vibration motor. The sieve plate is fixed at a high density, and the sieve plate is provided with reinforcing ribs.
4. After the welder has welded, the weld hole will not appear strictly, and the bottom is supported by channel steel. 
5. In addition, the sieve hole can be adjusted according to needs, the equipment noise is small, and the dewatering effect is good.
6. The dewatering screen before delivery, the staff will debug it, whether the vibration motor is normal, and whether the vibration exciter is running well, to ensure the quality of the dewatering screen for the customer.
7. Additional value of dewatering screen: For products with low mud content, the dewatering screen can also be used directly, and no sand washing machine is needed, which saves the cost of the customer and can achieve the same effect.