The finished product storage warehouse is also called bulk storage warehouse, which, as the name implies, is the storage warehouse of finished mortar products, parallel to the bagged mortar storage workshop. The capacity, quantity and loading of finished product storage bin on a dry mix mortar production line affect the development of mortar manufacturers. Therefore, the rationality of its configuration should be fully considered in the preliminary production line planning. The current layout of finished product storage warehouse is divided into two ways. One is to set a large-capacity warehouse under the mixer, under which the bulk loader is connected. In addition, another is a common with the main building side by side through the spiral conveyor and bucket lift machine will be finished materials into the warehouse of the secondary way. Among them, the first setting mode is mainly considered in two aspects: first, the conveying equipment is omitted; second, the conveying link of finished materials is omitted to reduce the separation of finished materials to some extent. The disadvantages are :
1.Production allocation is not flexible. If the warehouse is full or there is material stored in it, and there is a place that needs to supply a cart of other varieties or dry mix  mortar, then the production can only be carried out after the materials in the warehouse are processed;
2.Increasing the load on the main building will also increase the overall height of the main building.
The main form on the market is lateral layout, that is, the side of the main building to set up finished warehouse. Side - by - side layout is divided into parallel and series. The side-by-side type is that the bulk carrier of finished products storage warehouse and the bulk carrier under the main building have independent bulk carrier lanes respectively; The tandem storage warehouse shares one bulk carrier lane with the bulk carrier under the main building. generally speaking, if the site layout allows, parallel is the best solution. Can have two or more parking Spaces at the same time, improve loading efficiency, also allow the diversification of product supply. In general, the tandem type is only used when the site layout is limited. Whether in series or in parallel, it is better that the driveway can run through. If it cannot run through the main building or the warehouse of finished products due to the site or other reasons, the type and form of bulk trucks to be used by the production line should be considered when designing the layout, and the distance between the bulk truck and the obstacles should be left enough.