Because the hardness is too high, the cutting tool when the heat is too large, if not timely heat dissipation will make the tool annealing. Affect processing, the speed of the processing equipment is very low. The general processing method is the gantry milling machine, the broken plate (referred to as tooth plate) four corners of the pad, so that the tooth tip of the tooth plate does not contact the bed surface, and then four corners are pressed by pressure plate , and then process. Because the tooth plate is not processed at the pressing plate, so after processing, the remaining surface (pressing plate) need to move the pressing plate and finish the rest of the processing , because the hardness of the tooth plate, the tool speed can not be too fast, so the processing period is particularly long, and the tooth plate is the key part of the whole equipment featuring large loss, large quantity demand, So this common processing method can not meet the needs of production. For improved processing efficiency of tooth plate,  the processing quality is  ensured, and  the processing efficiency is improved. On the basis of these points, We improved the processing method to solve this problem.

1. Design of processing tools

This processing method is mainly to solve the problem of toothed plate loading card, that is, it can be convenient to find, and can make the loading card after a processing is completed, without repeating the loading card, in order to better improve the processing efficiency, combined with the existing equipment, we choose a double column milling processing, so that our processing efficiency will be greatly improved. Embarks from the above two points, we designed a clamping fixture for symmetric device, so that ensure the clamping fixture can be used on the double column milling.   The rest we solve is the card loading problem, that is, can load the card stability, and make it easy to find the right,so we will pack info is designed to be the same as the tooth plate of curve arc info, and in the following design hook groove, this hook groove is used to stuck the lower end of the tooth plate, The hook grooves are designed in strict accordance with the lower end of the gear plate prototype, so that the gear plate is well mounted on the device.

2. The clamping process of double column milling machining tooth plate

With double column milling main loading work step is: first of all, the fixed tool is mounted on the double column milling machine surface, as far as possible in the middle of the key block in the bed surface groove. The use of bolt compression, then do not have to find the right and the key block has achieved the accuracy of the straight direction; The hook surface of the lower end of the tooth plate is clamped in the hook groove of the fixed fixture, the upper pressing plate is pressed on, and the pressure is not tightened temporarily; The use of top wire alignment, alignment after the pressing plate, and then you can be processed.

Power machine vibration interference in machining industry is a relatively common problem. Vibration and the vibration of large machine for sensitive machine often decorated in a processing workshops, the mutual interference between them sometimes is caused by normal operation. Therefore, vibration interference is particularly important, adopting reasonable design and construction scheme. The vibration interference must be able to reduce  to the minimum, so as to meet the needs of machining.

Above we introduced The Processing of Double tooth Sizers Crusher with Crushing Tooth Plate. The HENAN EXCELLENT MACHINERY CO.,LTD is a professional bulk material conveying equipment manufacturer. We have professional production capacity and rich production experience as well as strict product quality inspection . We can guarantee that every equipment we produced is qualified equipment, and we ensure the qualified rate of the products. To know more about our products, Please visit our official website: https://www.exctmach.com/.