Conveyor pulley is the driver of belt conveyor. As an crucial part of the conveyor, it is extensively utilized in numerous fields. It is able to be divided into built-in and external operating modes. The two products work differently because they are fixed in different places. Today let me show you the two aspects.
1. Working principle of the built-in type conveyor pulley:

The built-in type is a driving device, in which the electric drum motor and the reducer are placed in the roller body, and then the power is transferred from the motor to the roller body through the reducer, so that the power generated can drive the conveyor belt to rotate. Therefore, the deceleration principle of these two different devices is also different.

2. Working principle of the external type:

In case of the external type, the motor is outside the drum, but the reducer is installed in the equipment. The power generated by the motor is transmitted to the electric drum through the transmission of the coupling. The coupling drives the drum to rotate under the action of the reducer, thus driving the conveyor belt to rotate.

The taper device is an important part to ensure that the electric drum can run, which plays a key role in the operation of the drum.

But because the application scope of electric drum is not the same, the corresponding cone device installation will also change, so we need to install equipment and accessories according to the actual situation in order to give full play to the efficiency of the use of the whole equipment. The utility model provides a cycloidal electric roller taper winding device which can make the rolling cone busbar parallel to the center of the upper roller so as to expand a range of the rolling cone.

The programme adopted:

There is a cone in the upper roller jacket, between the roller and the rolling cone arranged in the axial friction ring, in the upper roller radial left side from right to left with a bearing and a positioning sleeve, the cone and the positioning sleeve is provided with a clamping ring at the left end of the bottom of the cone fixed with a positioning key and the bottom right side of the cone fixed with a friction piece.

The above introduction is all about the conveyor pulley. In fact, in the installation of the conveyor pulley, the friction force has a great impact on us, so we can reduce the friction force and improve the construction accuracy by dropping lubricating oil, which is convenient for work and improve the efficiency of work.

The above has introduced the working principle of conveyor pulley and its coning device. The HENAN EXCELLENT MACHINERY CO.,LTD is a professional bulk material conveying equipment manufacturer. We have professional production capacity and rich production experience as well as strict product quality inspection . We can guarantee that every equipment we produced is qualified equipment, and we ensure the qualified rate of the products. To know more about our products, Please visit our official website: https://www.exctmach.com/.